rim size and offset

[sosick]

im plannig to get new rims in the near future. the ones i have now stick out a little . lookin to get 19's. what i need to know is the correct offset so i can have a nice drop without rubbing issues. also the tire size. thanks in advance.

[OMEGA PHX]

I suppose your fenders are roll/cut, so a +42 and tire size 225/35(recommended) or 225/30.

[sosick]

my fenders are not rolled or cut.. basically i want it to be kinda like the way the stock tires are. is +42 and tire size 225/35 close to that?

[blue8g]

that oughta work perfectly

[OMEGA PHX]

my fenders are not rolled or cut.. basically i want it to be kinda like the way the stock tires are. is +42 and tire size 225/35 close to that?

I think you'll have to roll/cut you fenders anyway if you want to be lower. The +42 Its close to OEM also you could go a lil higher like +44 or +46 but i don't think it easy to find your desired rims in that offsets also try using 7.5 width rims.

[sosick]

ight cool thanks

[fatal1]

stock offset is +48...there are a lot of wheels around that offset but if a desired wheel is not available try to stay close to it...225/35/19 would be the tire you want it would be closest to the stock rotation and you wouldnt need any mods to fit them